Knowledge Base >
What specifications does CDRouter IPv6 support?
What specifications does CDRouter IPv6 support?
IPv6CDRouter IPv6 provides test coverage for many of the most common IPv6 features found in today's leading CPE devices that support the following IETF IPv6 specifications:
| Specification | Title |
| IETF RFC 2460 | Internet Protocol, Version (IPv6) Specification |
| IETF RFC 2461 | Neighbor Discovery for IP Version 6 (IPv6) |
| IETF RFC 2463 | Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version (IPv6) Specification |
| IETF RFC 4862 | IPv6 Stateless Address Autoconfiguration |
| IETF RFC 3056 | Connection of IPv6 Domains via IPv6 Clouds (aka 6to4) |
| IETF RFC 3315 | Dynamic Host Configuration Protocol for IPv6 (DHCPv6) |
CDRouter IPv6 supports CPE devices that implement RFC 3056 tunneling on the WAN. RFC 3056 is commonly referred to as “6to4” and is a technique for providing automatic IPv6 connectivity over IPv4 networks. When CDRouter IPv6 is enabled, CDRouter will create and maintain a 6to4 relay server on the WAN. CDRouter will also create one or more IPv6 clients on the LAN that support IPv6 stateless address autoconfiguration as defined in RFC 4862.
Related articles that may also be helpful:
- How do I disable IPv6 on my Linux system?
- How can I skip the interface address checking for IPv6 when running CDRouter?
- How can I specify the IPv6 "Free Network Range"?
- CDRouter expects the WAN interface to block PINGs. How can I change this default behavior?
- What is the Router Advertisement Interval? How could an incorrect value cause test failures?