Knowledge Base >
Categories >
Category:
- What is the QA Cafe Knowledge Base?
- Which wireless networking cards are supported?
- What operating systems does CDRouter support?
- Can I set up a default for the -testpath and -config options?
- How do I install old versions of CDRouter?
- What NAT ALGs does CDRouter test?
- Can I use CDRouter if my router has a built in xDSL interface?
- Is there a way to set the MRU that CDRouter uses for PPP LCP?
- How do I troubleshoot my PPPoE connection when the device under test won't connect to CDRouter?
- Why does the test suite take so much longer to run when the wanMode is set to DHCP?
- How many TCP or UDP connections can be supported?
- Do I need to configure a DNS server in order to run CDRouter?
- Will CDRouter work if my router uses Ethernet auto-negotiation?
- Is there any value is running the tests using different IP addresses for the WAN and LAN configuration?
- How can I include my local.conf settings in the results?
- What ATM cards does CDRouter support?
- How can I tell if CDRouter is receiving any ATM packets?
- How should I configure my Ethernet interfaces for CDRouter?
- Why do I see '0 tests run' when I try to execute a test?
- Can CDRouter be configured to use only one DNS server?
- How can I configure my ATM driver to get loaded automatically?
- How can I generate a web page with all the test case descriptions?
- Why does a test fail when all the tests are run, but passes when run individually?
- How can I add extra delay when using "RestartDut" to reboot my device?
- How to I enable CDRouter's built-in SNMP trap receiver?
- How do I repeat a test case or module over and over?
- Why am I receiving T1/HDLC CRC errors?
- How do I check the status of the T1/E1 interface?
- How do I skip a test module or test case?
- Why are T1 forwarding tests failing with large packet sizes?
- How can I insert a break point into a test?
- Is the Sangoma dual T1/E1 card supported?
- Is Redhat Enterprise Linux 3.0 supported?
- Is Fedora Linux supported ?
- What versions of Red Hat Linux do you support?
- Can I split my local.conf configuration file into multiple files?
- Where can I get a license key for my test host?
- Can I use a non zero VPI?
- Can I use multiple T1 and V.35 cards in the same Linux host?
- How do I know what a test case is doing?
- How do I adjust the log output level?
- How do I check the status of the V.35 interface?
- Are V.35 serial interfaces supported?
- How do I execute a single test case ?
- How to I configure CDRouter to display syslog messages?
- How do I create a reliable test setup for wireless testing?
- How can I configure additional RADIUS server attributes?
- How do I tell CDRouter to wait for each WAN interface to connect before starting a test?
- How can I automate web based management on on my device?
- How can I check the signal strength of my wireless connection?
- How can I run tests that require multiple LAN clients on a single wireless interface?
- How can I tell if my router or access point has WPA or WPA2 enabled?
- My acces point or router does not show up with WPA enabled during a wireless scan?
- How do I configure CDRouter to use a wireless LAN interface?
- How can I end pause mode while running?
- How do I generate a log file of the test run?
- How can I reset my wireless driver if my wireless card will not associate?
- How do I configure PPTP?
- Where can I download DriverLoader for my wireless card?
- How can I add inline comments to the configuration file?
- How can I configure CDRouter to run without a DHCP server in the router?
- How can I slow down port scans and DMZ scans ?
- How can I configure CDRouter's DNS server with a specific hostname?
- How do I configure a NTP server?
- How do I configure CDRouter to skip the initial Restart prompt?
- How do I troubleshoot my wireless connection to CDRouter when I'm using WPA-RADIUS or WPA2-RADIUS security?
- Does CDRouter support Gigabit Ethernet cards?
- How can I comment out one of my LAN/WAN interfaces from the configuration file?
- How can I connect a ATM multimode OC-3 card to a singlemode OC-3 interface?
- What is the difference between the test case execution number and test case name?
- Why are only X packets forwarded out through my WAN connection when I use PPTP?
- Why is my router sending so many DNS requests for NTP servers?
- How do I disable delay timers when CDRouter starts?
- How do I capture packets while CDRouter runs?
- How can I find the *.inf and driver file for my wireless card in order to install driverloader?
- How can I add comments to the log file and HTML report?
- What is BuddyWeb?
- How can I use BuddyWeb with my existing buddy scripts?
- How do I import and export results with BuddyWeb?
- How do I set up Firefox to automatically open Wireshark captures?
- How do I repeat tests in a BuddyWeb package?
- I get an error installing CDRouter with SELinux enabled?
- How can I add a specific delay before or after a test case?
- How can I manually import configuration files into BuddyWeb?
- Do I need a nas0 interface to run CDRouter with an ATM interface?
- BuddyWeb tells me a test doesn't exist. How can I fix this?
- Does BuddyWeb need to connect to the Internet?
- How do I copy and paste in the configuration editor?
- How do I setup iptables for BuddyWeb?
- Can I run BuddyWeb if my browser is not connected to the internet?
- What can I do if my wireless USB device does not show up after a reboot?
- How do I update my license?
- How can I tell if I have the most recent version of CDRouter?
- How can I filter out specific protocol messages?
- Where can I find the test case descriptions for CDRouter?
- What is the difference between CDRouter and CDRouter-Multiport?
- Can I use CDRouter's wireless interfaces without broadcasting my SSID?
- Can I use ndiswrapper to configure my wireless interface?
- How can I override CDRouter configuration file settings on the command-line?
- Can CDRouter display DUT information such as firmware version and model in the report?
- How can I debug IPSEC pass through testing?
- How do I configure CDRouter for SIP testing?
- How can I force my wireless interface to be a different device name?
- Does CDRouter support WPA2?
- Can I install CDRouter on VMWare?
- What is the difference between WPA and WPA2?
- Can I configure CDRouter to test the HTTP proxy on my router?
- How can I skip the interface address checking when running CDRouter?
- How can I pass the nat.tcl tests if my device is doing load-balancing on the WAN interfaces?
- Why does my 802.1x RADIUS session stop after the first packet?
- How can I upgrade my kernel to a kernel with 16k stacks?
- How can I speed up EAPOL testing on my device?
- How can I run with both wired and wireless interfaces?
- How do I execute buddy-diag?
- Why do I receive DHCP timeout errors running the scaling tests?
- How do I configure CDRouter to use the A series A101 or A102 T1/E1 adapters from Sangoma?
- How do I setup HDLC streaming in my Sangoma T1/E1 wanpipe configuration?
- Do you have an example wanpipe1.conf file for the Sangoma A101 or A102 T1/E1 card?
- Advanced WPA supplicant controls
- How do I upgrade from CDRouter to CDRouter-Multiport?
- How do I uninstall CDRouter from my system?
- What root certificate must be installed to verify acs.qacafe.com.pem?
- How can I send a packet from a capture file?
- What is auto-update?
- Advanced DMZ testing
- How do I display the contents of a SSL certificate?
- How can I configure a test setup using a 3G or WiMax Wireless WAN connection?
- How do I shuffle the CDRouter test order?
- What is IPSEC SPI Tracking?
- What are the different types of NAT that are supported?
- How do I restart the BuddyWeb daemon?
- How do I use my own certificates for CDRouter's ACS?
- What is ascii hex format?
- How can I test a router with a MoCA interface?
- What interface cards, DSLAM platforms, and CMTS platforms do you recommend for use with CDRouter?
- What do I do when Buddy fails to launch from BuddyWeb?
- How can I test that my ATM card is working?
- How can I force CDRouter to start with a specific source port number?
- How can I configure buddy to always include a command-line option?
- What should I check if I do not receive an initial Inform from CPE?
- Should the periodic Inform be enabled or disabled?
- I received an invalid certification using HTTPS. What should I do?
- What should I set the CPE default user name and password to?
- Why do tests fail when the testvar tr69InitiateConnection is set to no?
- Is there a workaround for a failing CWMP client?
- How do I update an expired TR-069 related certificate?
- What equipment will I need to run CDRouter?
- How do I install CDRouter, CDRouter-Multiport, or the CDRouter Demo?
- How do I install Tcl on my system?
- How do I remove SELinux?
- How do I add my custom test cases to BuddyWeb?
- Is there an easy way to select multiple tests in BuddyWeb's Package Editor Wizard?
- How can I automatically restart my router each time I run a test in buddy or BuddyWeb?
- How can I change the time stamps in my Wireshark capture files to match the time stamps in the log files?
- How do I configure additional DHCP options in CDRouter?
- What options should I include when sending log files to QA Cafe Support?
- How can I run multiple tests with different configuration files?
- How can I assign persistent names to network interfaces?
- I just purchased the CDRouter TR-069 add-on. How do I install it?
- How do I update my certificates for 802.1x/EAPOL testing?
- Will CDRouter work with Xen-based virtualization kernels?
- What test execution options does CDRouter offer?
- Is DynDNS with https supported?
- Common testing issues with TR-069 and SSL.
- Can I call another test case within my custom test case?
- Can I customize the order in which test cases are executed?
- How do I convert a certificate from .cer/.crt/.der format to .pem format?
- Why are tests being run against a WAN interface that does not exist on my device?
- How do I convert from a Java keystore certificate to .pem format?
- Which drivers should I use for the Netgear WG111T USB wireless adapter?
- CDRouter 4.0 Release Notes
- CDRouter 3.8.1 Release Notes
- CDRouter 3.8 Release Notes
- CDRouter 3.7 Release Notes
- CDRouter 3.6 Release Notes
- CDRouter 3.5 Release Notes
- CDRouter 3.4 Release Notes
- CDRouter 3.3 Release Notes
- CDRouter 3.2 Release Notes
- CDRouter 3.1 Release Notes
- CDRouter 3.0 Release Notes
- CDRouter 2.8 Release Notes
- CDRouter 2.7.1 Release Notes
- CDRouter 2.7 Release Notes
- CDRouter 2.6 Release Notes
- CDRouter 2.5 Release Notes
- CDRouter 2.4 Release Notes
- CDRouter 2.3 Release Notes
- CDRouter 2.2 Release Notes
- CDRouter 2.1 Release Notes
- Can I just unplug my USB wireless interface to restart it?
- What is a CDRouter build?
- Can I configure the RADIUS server to be on the LAN?
- CDRouter 4.1 Release Notes
- Which drivers should I use for the D-Link DWA-142 and DWA-130 USB wireless adapters?
- Can I run multiple startup scripts with the RestartDut testvar?
- Can I run a custom script at the end of each test run?
- What web browser should I use with BuddyWeb?
- CDRouter 4.1.1 Release Notes
- What specifications does CDRouter TR-069 support?
- What types of devices does CDRouter TR-069 support?
- How can I tell which Ethernet interfaces are connected and/or active?
- CDRouter 4.1.2 Release Notes
- The basic Ethernet-to-Ethernet router
- The basic wireless router
- A multi-port router with Ethernet and wireless
- A dual-WAN router
- A TR-069 LAN-side device
- Regression testing with multiple devices
- Regression testing with multiple wireless devices
- Can I specify the SSL certificates used by CDRouter's firmware download server?
- Can I run one of my scripts before or after a test case?
- Can I increase the DNS lookup timeout?
- Does CDRouter automatically handle fragmented IP packets?
- CDRouter 4.2 Release Notes
- Madwifi driver support for CDRouter
- A T1/E1 or V.35 router
- A router with MoCA
- A wireless access point
- A DHCP relay setup
- How do I convert a certificate from .pem format to .der or .cer format?
- Do you have an example wanpipe1.conf file for the Sangoma S5148 T1/E1 card?
- How do I configure CDRouter to use legacy S series T1/E1 adapters from Sangoma?
- How do I uninstall Tclxml from my system?
- CDRouter 4.3 Release Notes
- Which test cases are skipped if only a single LAN client is available?
- How do I force CDRouter to use an empty string for the PPPoE Service Name field?
- How do I install the Cisco Aironet PCI wireless adapter?
- My router has a proxy service. Can I test it as a Virtual Service (Port Forwarding)?
- What are the differences between the 32 and 64 bit versions of CDRouter?
- CDRouter system requirements
- How can I add tags to a test package being executed from the command line?
- How do I correct a problem with a custom testpath?
- CDRouter 5.0 Release Notes
- Which version of BuddyWeb do I have installed?
- How can I password protect and encrypt BuddyWeb?
- Strategies for firmware download testing
- How can I verify the acs.qacafe.com.pem SSL certificate?
- How do I remove Network Manager?
- CDRouter 6.0 Release Notes
- How do I disable IPv6 on my Linux system?
- How can I skip the interface address checking for IPv6 when running CDRouter?
- What specifications does CDRouter IPv6 support?
- How can I specify the IPv6 "Free Network Range"?
- CDRouter expects the WAN interface to block PINGs. How can I change this default behavior?
- What is the Router Advertisement Interval? How could an incorrect value cause test failures?
- What is the ipv6RemoteHost used for, and how can I change its address?
- How do I obtain CDRouter IPv6?
- I just purchased CDRouter IPv6. How do I install it?
- How can tell if CDRouter IPv6 is enabled on my system?
- Which WAN modes are supported by CDRouter IPv6?
- How do I configure CDRouter's LAN client(s) for autoconf?
- How do I enable CDRouter's IPv6 functionality?
- Can I add a custom DNS entry using an IPv6 address?
- What is the state flow of a typical IPv6 startup procedure?
- How do I enable JavaScript in my Browser?
- How do I setup PD-128 Test 2.3 for SSL client certificate authentication of the CPE?
- My device is not initiating a 6to4 tunnel on the WAN. What should I do?
- CDRouter 6.1 Release Notes
- How do I enable the pure Tcl XML parser within CDRouter?
- Where can I find an example configuration for CDRouter IPv6?
- How do I configure CDRouter's LAN client(s) for DHCPv6?
- How can I control how many clients are used in the IPv6 Scaling tests
- Which LAN modes are supported by CDRouter IPv6?
- Why is CDRouter skipping some profile verification tests?
- CDRouter 6.2 Release Notes
- MD5 Authentication Mode in RIPv2 Testing
- What specifications does CDRouter IPv6 support?
- How do I configure CDRouter for DHCPv6 prefix delegation?
- Is CDRouter TR-069 a replacement for interoperability testing?
Categories
- General (19)
- Wireless (28)
- Installation (24)
- Test Execution (29)
- Test Coverage (9)
- PPP (4)
- Basic Configuration (26)
- ATM (7)
- WAN Cards (T1/E1 and V.35) (12)
- RADIUS (3)
- BuddyWeb (22)
- TR-069 (25)
- Test API (2)
- Release Notes (29)
- The CDRouter Cookbook (11)
- IPv6 (22)
- rip (1)