While IPv6 has been in development for more than a decade, the availability of residential IPv6 is still in its infancy. Traditional CPE devices running IPv4 with NAT are now adding IPv6 capabilities and 6to4 transition techniques even before native IPv6 connections are commonly available. CDRouter is IPv6 capable and provides vendors, ISPs, and test labs with a set of functional test cases to verify the IPv6 readiness of CPE devices.
Common IPv6 CPE issues
While developing CDRouter IPv6, we benchmarked several off-the-shelf IPv6 CPE devices. Right away, the results were surprising.
- IPv6 firewall support not enabled by default
Surprisingly, traditional CPE products advertised as firewall devices often do not have a firewall enabled for IPv6. Even worse, some devices do not have an option to enable a firewall for IPv6.
- IPv6 firewall not as advanced as existing IPv4 firewall
In cases where the IPv6 firewall does exist, the level of functionality available to IPv4 connections is not always available to IPv6 connections. This is true of advanced applications that normally need an IPv4 ALG to operate through NAT. In IPv6, the firewall must still open incoming ports for applications such as active mode FTP. CDRouter’s IPv6 application module can reveal which application protocols may not work as expected through the IPv6 firewall.
- Routing is not configured correctly for 6to4 connection
6to4 is the most common way of connecting IPv6 devices across the IPv4 Internet. Some devices are not correctly installing default routes for IPv6 in order to work with 6to4 tunnels and prevent CPE devices from reaching the native IPv6 Internet.
- Need to test along side of IPv4 to support dual stack devices
CDRouter IPv6 provides both IPv6 and IPv4 testing at the same time. For transition technologies like 6to4, this provides a mechanism to verify the robustness of the IPv6 implementation when the IPv4 network is dynamic. Some devices have a static implementation that is unable to change when the IPv4 network changes. These devices require a reboot to handle network changes.
- New technologies for supporting IPv6 are not well tested or not compatible with existing IPv4 devices
The roll out of IPv6 is also placing more demands on IPv4 services such as DNS. The size of DNS name records is growing beyond the original UDP 512 byte limitation of DNS and now requires the use of the EDNS0 option and IPv4 fragmentation. However, some IPv4 based CPEs have issues supporting IPv4 fragmenting responses from DNS servers. Along with IPv6 test cases, CDRouter contains additional DNS tests to verify support of the EDNS0 and larger fragmented IPv4 DNS responses.
- MTU is clamped to a smaller, more pessimistic value
Some CPE devices are given up potential bandwidth by limiting the MTU size to IPv6’s minimum MTU size of 1280 bytes. CDRouter Path MTU discovery testing can determine the CPE’s IPv6 MTU and verify forwarding of various packet sizes.
- IPv6 is implemented but not configurable
Some devices that do not officially support IPv6 actually have an IPv6 implementation that is enabled. These devices send out IPv6 Router Advertisements and support 6to4 tunneling automatically. Worse, they don’t have an IPv6 firewall enabled and provide no means of disabling IPv6. Unknowingly, users may expose themselves to IPv6 based attacks since inbound traffic is not blocked.